CodeIgniter

deicool · May 1, 2021

Hello

Has anyone deployed CodeIgniter on OpenLiteSpeed Web Sever? If yes, can you please tell me the steps?

Deepak

Cold-Egg · May 3, 2021

Hi,

You can try following installation commands on a fresh server.

Code:

bash <( curl -k https://raw.githubusercontent.com/litespeedtech/ols1clk/master/ols1clk.sh ) -w
apt-get install lsphp74-intl -y
curl -sS https://getcomposer.org/installer | php
mv composer.phar /usr/local/bin/composer
chmod +x /usr/local/bin/composer
cd /usr/local/lsws
rm -rf /usr/local/lsws/wordpress/
composer create-project codeigniter4/appstarter wordpress

## Add your DB name, DB user, DB password to Database.php
vi app/Config/Database.php

## Add your domain/IP to the baseURL value
vi app/Config/App.php

Now you can visit your CodeIgniter from the browser http://example.com/public

Refer

deicool · May 3, 2021

Hello

Thank you for your response. I did the steps mentioned by you (On Ubuntu 20.04)

HTTP:

I can access "http://localhost:8088/" but cannot access "http://localhost:8088/public". It gives the error (Request Page Not Found)

While installation as mentioned by you, there were some minor errors. Please see below

Thank you
Deepak

Code:

root@deicool:/usr/local# bash <( curl -k https://raw.githubusercontent.com/litespeedtech/ols1clk/master/ols1clk.sh ) -w

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 55542  100 55542    0     0  26600      0  0:00:02  0:00:02 --:--:-- 26600
**********************************************************************************************
*                    Open LiteSpeed One click installation, Version 3.0                      *
*                    Copyright (C) 2016 - 2021 LiteSpeed Technologies, Inc.                  *
**********************************************************************************************
Current platform is UBUNTU20 ubuntu focal.

Starting to install OpenLiteSpeed to /usr/local/lsws/ with the parameters below,
WebAdmin password:        ***************
WebAdmin email:           root@localhost
LSPHP version:            74
MariaDB version:          10.4
Install WordPress:        Yes
WordPress HTTP port:      80
WordPress HTTPS port:     443
WordPress language:       en_US
Web site domain:          *
MySQL root Password:      CTZZu3FHHBvM8TQZ
Database name:            olsdbname
Database username:        olsdbuser
Database password:        ivgljMs45aig7I3Z
WordPress plus:           No
WordPress location:       /usr/local/lsws/wordpress (New install)
Your password will be written to file:  /usr/local/lsws/password

Are these settings correct? Type n to quit, otherwise will continue. [Y/n]Start OpenLiteSpeed one click installation >> >> >> >> >> >> >>
Start setup OpenLiteSpeed
     - add litespeedtech repo
     - update list
E: The repository 'http://ppa.launchpad.net/damien-moore/codeblocks-stable/ubuntu focal Release' does not have a Release file.
     - Install OpenLiteSpeed
     - Install lsphp74
     - Setup lsphp symlink
End setup OpenLiteSpeed
Set OpenLiteSpeed Web Admin access.
WP CLI already exist
/usr/bin/php symlink exist, skip symlink.
Start setup virtual host config
     - Check existing port
     - Create wordpress listener
     - Insert wordpress virtual host
     - Create wordpress virtual host conf
End setup virtual host config
Avoid port 80/443 conflict.
mysqladmin: [Warning] Using a password on the command line interface can be insecure.
mysqladmin: [Warning] Using a password on the command line interface can be insecure.
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: YES)'
mysqladmin: [Warning] Using a password on the command line interface can be insecure.
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: YES)'
Please input the current root password:**********       
mysqladmin: [Warning] Using a password on the command line interface can be insecure.
Warning: Since password will be sent to server in plain text, use ssl connection to ensure password safety.
Start setup mysql
mysql: [Warning] Using a password on the command line interface can be insecure.
mysql: [Warning] Using a password on the command line interface can be insecure.
user olsdbuser exists in mysql.user
mysql: [Warning] Using a password on the command line interface can be insecure.
mysql: [Warning] Using a password on the command line interface can be insecure.
ERROR 1064 (42000) at line 1: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'IDENTIFIED BY 'ivgljMs45aig7I3Z'' at line 1
mysql: [Warning] Using a password on the command line interface can be insecure.
Finished MySQL setup without error.
End setup mysql
Start Download WordPress file
End Download WordPress file
Start Create Wordpress config
ERROR 1045 (28000): Access denied for user 'olsdbuser'@'localhost' (using password: YES)
Done Create Wordpress config
Congratulations! Installation finished.
Please access http://server_IP:80/ to finish setting up your WordPress site.
And also you may want to activate the LiteSpeed Cache plugin to get better performance.
End OpenLiteSpeed one click installation << << << << << << <<

Start auto testing >> >> >> >>

OK: test webAdmin page passed.
OK: test Example vhost page passed.
Error: test wordpress HTTP first page failed.
Error: test wordpress HTTPS first page failed.
Errors were encountered during testing. In many cases these errors can be solved manually by referring to installation logs.
Service loading issues can sometimes be resolved by performing a restart of the web server.
Reinstalling the web server can also help if neither of the above approaches resolve the issue.
End auto testing << << << <<
Thanks for using OpenLiteSpeed One click installation!



composer create-project codeigniter4/appstarter wordpress
Do not run Composer as root/super user! See https://getcomposer.org/root for details
Continue as root/super user [yes]? yes
Creating a "codeigniter4/appstarter" project at "./wordpress"
Installing codeigniter4/appstarter (v4.1.1)
  - Installing codeigniter4/appstarter (v4.1.1): Extracting archive
Created project in /usr/local/lsws/wordpress
Loading composer repositories with package information
Updating dependencies
Lock file operations: 43 installs, 0 updates, 0 removals
  - Locking codeigniter4/framework (v4.1.1)
  - Locking doctrine/instantiator (1.4.0)
  - Locking fakerphp/faker (v1.14.1)
  - Locking kint-php/kint (3.3)
  - Locking laminas/laminas-escaper (2.7.0)
  - Locking laminas/laminas-zendframework-bridge (1.2.0)
  - Locking mikey179/vfsstream (v1.6.8)
  - Locking myclabs/deep-copy (1.10.2)
  - Locking nikic/php-parser (v4.10.4)
  - Locking phar-io/manifest (2.0.1)
  - Locking phar-io/version (3.1.0)
  - Locking phpdocumentor/reflection-common (2.2.0)
  - Locking phpdocumentor/reflection-docblock (5.2.2)
  - Locking phpdocumentor/type-resolver (1.4.0)
  - Locking phpspec/prophecy (1.13.0)
  - Locking phpunit/php-code-coverage (9.2.6)
  - Locking phpunit/php-file-iterator (3.0.5)
  - Locking phpunit/php-invoker (3.1.1)
  - Locking phpunit/php-text-template (2.0.4)
  - Locking phpunit/php-timer (5.0.3)
  - Locking phpunit/phpunit (9.5.4)
  - Locking psr/container (1.1.1)
  - Locking psr/log (1.1.3)
  - Locking sebastian/cli-parser (1.0.1)
  - Locking sebastian/code-unit (1.0.8)
  - Locking sebastian/code-unit-reverse-lookup (2.0.3)
  - Locking sebastian/comparator (4.0.6)
  - Locking sebastian/complexity (2.0.2)
  - Locking sebastian/diff (4.0.4)
  - Locking sebastian/environment (5.1.3)
  - Locking sebastian/exporter (4.0.3)
  - Locking sebastian/global-state (5.0.2)
  - Locking sebastian/lines-of-code (1.0.3)
  - Locking sebastian/object-enumerator (4.0.4)
  - Locking sebastian/object-reflector (2.0.4)
  - Locking sebastian/recursion-context (4.0.4)
  - Locking sebastian/resource-operations (3.0.3)
  - Locking sebastian/type (2.3.1)
  - Locking sebastian/version (3.0.2)
  - Locking symfony/deprecation-contracts (v2.4.0)
  - Locking symfony/polyfill-ctype (v1.22.1)
  - Locking theseer/tokenizer (1.2.0)
  - Locking webmozart/assert (1.10.0)
Writing lock file
Installing dependencies from lock file (including require-dev)
Package operations: 43 installs, 0 updates, 0 removals
  - Installing psr/log (1.1.3): Extracting archive
  - Installing laminas/laminas-zendframework-bridge (1.2.0): Extracting archive
  - Installing laminas/laminas-escaper (2.7.0): Extracting archive
  - Installing kint-php/kint (3.3): Extracting archive
  - Installing codeigniter4/framework (v4.1.1): Extracting archive
  - Installing symfony/deprecation-contracts (v2.4.0): Extracting archive
  - Installing psr/container (1.1.1): Extracting archive
  - Installing fakerphp/faker (v1.14.1): Extracting archive
  - Installing mikey179/vfsstream (v1.6.8): Extracting archive
  - Installing symfony/polyfill-ctype (v1.22.1): Extracting archive
  - Installing webmozart/assert (1.10.0): Extracting archive
  - Installing phpdocumentor/reflection-common (2.2.0): Extracting archive
  - Installing phpdocumentor/type-resolver (1.4.0): Extracting archive
  - Installing phpdocumentor/reflection-docblock (5.2.2): Extracting archive
  - Installing sebastian/version (3.0.2): Extracting archive
  - Installing sebastian/type (2.3.1): Extracting archive
  - Installing sebastian/resource-operations (3.0.3): Extracting archive
  - Installing sebastian/recursion-context (4.0.4): Extracting archive
  - Installing sebastian/object-reflector (2.0.4): Extracting archive
  - Installing sebastian/object-enumerator (4.0.4): Extracting archive
  - Installing sebastian/global-state (5.0.2): Extracting archive
  - Installing sebastian/exporter (4.0.3): Extracting archive
  - Installing sebastian/environment (5.1.3): Extracting archive
  - Installing sebastian/diff (4.0.4): Extracting archive
  - Installing sebastian/comparator (4.0.6): Extracting archive
  - Installing sebastian/code-unit (1.0.8): Extracting archive
  - Installing sebastian/cli-parser (1.0.1): Extracting archive
  - Installing phpunit/php-timer (5.0.3): Extracting archive
  - Installing phpunit/php-text-template (2.0.4): Extracting archive
  - Installing phpunit/php-invoker (3.1.1): Extracting archive
  - Installing phpunit/php-file-iterator (3.0.5): Extracting archive
  - Installing theseer/tokenizer (1.2.0): Extracting archive
  - Installing nikic/php-parser (v4.10.4): Extracting archive
  - Installing sebastian/lines-of-code (1.0.3): Extracting archive
  - Installing sebastian/complexity (2.0.2): Extracting archive
  - Installing sebastian/code-unit-reverse-lookup (2.0.3): Extracting archive
  - Installing phpunit/php-code-coverage (9.2.6): Extracting archive
  - Installing doctrine/instantiator (1.4.0): Extracting archive
  - Installing phpspec/prophecy (1.13.0): Extracting archive
  - Installing phar-io/version (3.1.0): Extracting archive
  - Installing phar-io/manifest (2.0.1): Extracting archive
  - Installing myclabs/deep-copy (1.10.2): Extracting archive
  - Installing phpunit/phpunit (9.5.4): Extracting archive
7 package suggestions were added by new dependencies, use `composer suggest` to see details.
Generating autoload files
29 packages you are using are looking for funding.
Use the `composer fund` command to find out more!

Cold-Egg · May 4, 2021

Hi,

You should access http://xxxxxx at port 80, not 8088. That's why it's not found.

By the way, did you install it on a fresh Ubuntu server? I haven't run into such an issue before.

deicool · May 4, 2021

On a fresh Ubuntu server, the errors have gone. (and it says the wordpress page was successfully tested).

However when I access my server on port 80, I am getting "404 Not found Error". On port 8088, I get the OpenLiteSpeed Home Page (I am also able to test the phpinfo page successfully here)

Code:

root@ip-172-31-25-151:~# bash <( curl -k https://raw.githubusercontent.com/litespeedtech/ols1clk/master/ols1clk.sh ) -w
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 56196  100 56196    0     0   295k      0 --:--:-- --:--:-- --:--:--  295k
**********************************************************************************************
*                    Open LiteSpeed One click installation, Version 3.0                      *
*                    Copyright (C) 2016 - 2021 LiteSpeed Technologies, Inc.                  *
**********************************************************************************************
Current platform is UBUNTU20 ubuntu focal.

Starting to install OpenLiteSpeed to /usr/local/lsws/ with the parameters below,
WebAdmin password:        *************
WebAdmin email:           root@localhost
LSPHP version:            74
MariaDB version:          10.4
Install WordPress:        Yes
WordPress HTTP port:      80
WordPress HTTPS port:     443
WordPress language:       en_US
Web site domain:          *
MySQL root Password:      kLIMfOYiRWjucDcT
Database name:            olsdbname
Database username:        olsdbuser
Database password:        qihxrgURasmHIord
WordPress plus:           No
WordPress location:       /usr/local/lsws/wordpress (New install)
Your password will be written to file:  /usr/local/lsws/password

Are these settings correct? Type n to quit, otherwise will continue. [Y/n]Y
Start OpenLiteSpeed one click installation >> >> >> >> >> >> >>
System update
Start setup OpenLiteSpeed
     - add litespeedtech repo
     - update list
     - Install OpenLiteSpeed
     - Install lsphp74
     - Setup lsphp symlink
End setup OpenLiteSpeed
Set OpenLiteSpeed Web Admin access.
Install wp_cli
Start setup virtual host config
     - Check existing port
     - Create wordpress listener
     - Insert wordpress virtual host
     - Create wordpress virtual host conf
End setup virtual host config
Avoid port 80/443 conflict.
Start Install MariaDB
     - Install software properties
     - Add MariaDB repo
     - Update packages
     - Install MariaDB
     - Start MariaDB
     - Set MariaDB root
End Install MariaDB
Start setup mysql
Finished MySQL setup without error.
End setup mysql
Start Download WordPress file
End Download WordPress file
Start Create Wordpress config
Done Create Wordpress config
Congratulations! Installation finished.
Please access http://server_IP:80/ to finish setting up your WordPress site.
And also you may want to activate the LiteSpeed Cache plugin to get better performance.
End OpenLiteSpeed one click installation << << << << << << <<

Start auto testing >> >> >> >>
OK: test webAdmin page passed.
OK: test Example vhost page passed.
OK: test wordpress HTTP first page passed.
OK: test wordpress HTTPS first page passed.
End auto testing << << << <<
Thanks for using OpenLiteSpeed One click installation!

root@ip-172-31-25-151:~# apt-get install lsphp74-intl -y
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  lsphp74-intl
0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.
Need to get 126 kB of archives.
After this operation, 517 kB of additional disk space will be used.
Get:1 http://rpms.litespeedtech.com/debian focal/main amd64 lsphp74-intl amd64 7.4.18-1+focal [126 kB]
Fetched 126 kB in 0s (399 kB/s) 
Selecting previously unselected package lsphp74-intl.
(Reading database ... 62277 files and directories currently installed.)
Preparing to unpack .../lsphp74-intl_7.4.18-1+focal_amd64.deb ...
Unpacking lsphp74-intl (7.4.18-1+focal) ...
Setting up lsphp74-intl (7.4.18-1+focal) ...

Creating config file /usr/local/lsws/lsphp74/etc/php/7.4/mods-available/intl.ini with new version
root@ip-172-31-25-151:~# curl -sS https://getcomposer.org/installer | php
All settings correct for using Composer
Downloading...


Composer (version 2.0.13) successfully installed to: /root/composer.phar
Use it: php composer.phar

root@ip-172-31-25-151:~#
root@ip-172-31-25-151:~# mv composer.phar /usr/local/bin/composer
root@ip-172-31-25-151:~#
root@ip-172-31-25-151:~# chmod +x /usr/local/bin/composer
root@ip-172-31-25-151:~# cd /usr/local/lsws
root@ip-172-31-25-151:/usr/local/lsws# rm -rf /usr/local/lsws/wordpress/
root@ip-172-31-25-151:/usr/local/lsws# composer create-project codeigniter4/appstarter wordpress
Do not run Composer as root/super user! See https://getcomposer.org/root for details
Continue as root/super user [yes]? yes
Creating a "codeigniter4/appstarter" project at "./wordpress"
Installing codeigniter4/appstarter (v4.1.1)
As there is no 'unzip' command installed zip files are being unpacked using the PHP zip extension.
This may cause invalid reports of corrupted archives. Besides, any UNIX permissions (e.g. executable) defined in the archives will be lost.
Installing 'unzip' may remediate them.
  - Downloading codeigniter4/appstarter (v4.1.1)
  - Installing codeigniter4/appstarter (v4.1.1): Extracting archive
Created project in /usr/local/lsws/wordpress
Loading composer repositories with package information
Updating dependencies
Lock file operations: 43 installs, 0 updates, 0 removals
  - Locking codeigniter4/framework (v4.1.1)
  - Locking doctrine/instantiator (1.4.0)
  - Locking fakerphp/faker (v1.14.1)
  - Locking kint-php/kint (3.3)
  - Locking laminas/laminas-escaper (2.7.0)
  - Locking laminas/laminas-zendframework-bridge (1.2.0)
  - Locking mikey179/vfsstream (v1.6.8)
  - Locking myclabs/deep-copy (1.10.2)
  - Locking nikic/php-parser (v4.10.5)
  - Locking phar-io/manifest (2.0.1)
  - Locking phar-io/version (3.1.0)
  - Locking phpdocumentor/reflection-common (2.2.0)
  - Locking phpdocumentor/reflection-docblock (5.2.2)
  - Locking phpdocumentor/type-resolver (1.4.0)
  - Locking phpspec/prophecy (1.13.0)
  - Locking phpunit/php-code-coverage (9.2.6)
  - Locking phpunit/php-file-iterator (3.0.5)
  - Locking phpunit/php-invoker (3.1.1)
  - Locking phpunit/php-text-template (2.0.4)
  - Locking phpunit/php-timer (5.0.3)
  - Locking phpunit/phpunit (9.5.4)
  - Locking psr/container (1.1.1)
  - Locking psr/log (1.1.4)
  - Locking sebastian/cli-parser (1.0.1)
  - Locking sebastian/code-unit (1.0.8)
  - Locking sebastian/code-unit-reverse-lookup (2.0.3)
  - Locking sebastian/comparator (4.0.6)
  - Locking sebastian/complexity (2.0.2)
  - Locking sebastian/diff (4.0.4)
  - Locking sebastian/environment (5.1.3)
  - Locking sebastian/exporter (4.0.3)
  - Locking sebastian/global-state (5.0.2)
  - Locking sebastian/lines-of-code (1.0.3)
  - Locking sebastian/object-enumerator (4.0.4)
  - Locking sebastian/object-reflector (2.0.4)
  - Locking sebastian/recursion-context (4.0.4)
  - Locking sebastian/resource-operations (3.0.3)
  - Locking sebastian/type (2.3.1)
  - Locking sebastian/version (3.0.2)
  - Locking symfony/deprecation-contracts (v2.4.0)
  - Locking symfony/polyfill-ctype (v1.22.1)
  - Locking theseer/tokenizer (1.2.0)
  - Locking webmozart/assert (1.10.0)
Writing lock file
Installing dependencies from lock file (including require-dev)
Package operations: 43 installs, 0 updates, 0 removals
  - Downloading psr/log (1.1.4)
  - Downloading laminas/laminas-zendframework-bridge (1.2.0)
  - Downloading laminas/laminas-escaper (2.7.0)
  - Downloading kint-php/kint (3.3)
  - Downloading codeigniter4/framework (v4.1.1)
  - Downloading symfony/deprecation-contracts (v2.4.0)
  - Downloading psr/container (1.1.1)
  - Downloading fakerphp/faker (v1.14.1)
  - Downloading mikey179/vfsstream (v1.6.8)
  - Downloading symfony/polyfill-ctype (v1.22.1)
  - Downloading webmozart/assert (1.10.0)
  - Downloading phpdocumentor/reflection-common (2.2.0)
  - Downloading phpdocumentor/type-resolver (1.4.0)
  - Downloading phpdocumentor/reflection-docblock (5.2.2)
  - Downloading sebastian/version (3.0.2)
  - Downloading sebastian/type (2.3.1)
  - Downloading sebastian/resource-operations (3.0.3)
  - Downloading sebastian/recursion-context (4.0.4)
  - Downloading sebastian/object-reflector (2.0.4)
  - Downloading sebastian/object-enumerator (4.0.4)
  - Downloading sebastian/global-state (5.0.2)
  - Downloading sebastian/exporter (4.0.3)
  - Downloading sebastian/environment (5.1.3)
  - Downloading sebastian/diff (4.0.4)
  - Downloading sebastian/comparator (4.0.6)
  - Downloading sebastian/code-unit (1.0.8)
  - Downloading sebastian/cli-parser (1.0.1)
  - Downloading phpunit/php-timer (5.0.3)
  - Downloading phpunit/php-text-template (2.0.4)
  - Downloading phpunit/php-invoker (3.1.1)
  - Downloading phpunit/php-file-iterator (3.0.5)
  - Downloading theseer/tokenizer (1.2.0)
  - Downloading nikic/php-parser (v4.10.5)
  - Downloading sebastian/lines-of-code (1.0.3)
  - Downloading sebastian/complexity (2.0.2)
  - Downloading sebastian/code-unit-reverse-lookup (2.0.3)
  - Downloading phpunit/php-code-coverage (9.2.6)
  - Downloading doctrine/instantiator (1.4.0)
  - Downloading phpspec/prophecy (1.13.0)
  - Downloading phar-io/version (3.1.0)
  - Downloading phar-io/manifest (2.0.1)
  - Downloading myclabs/deep-copy (1.10.2)
  - Downloading phpunit/phpunit (9.5.4)
  - Installing psr/log (1.1.4): Extracting archive
  - Installing laminas/laminas-zendframework-bridge (1.2.0): Extracting archive
  - Installing laminas/laminas-escaper (2.7.0): Extracting archive
  - Installing kint-php/kint (3.3): Extracting archive
  - Installing codeigniter4/framework (v4.1.1): Extracting archive
  - Installing symfony/deprecation-contracts (v2.4.0): Extracting archive
  - Installing psr/container (1.1.1): Extracting archive
  - Installing fakerphp/faker (v1.14.1): Extracting archive
  - Installing mikey179/vfsstream (v1.6.8): Extracting archive
  - Installing symfony/polyfill-ctype (v1.22.1): Extracting archive
  - Installing webmozart/assert (1.10.0): Extracting archive
  - Installing phpdocumentor/reflection-common (2.2.0): Extracting archive
  - Installing phpdocumentor/type-resolver (1.4.0): Extracting archive
  - Installing phpdocumentor/reflection-docblock (5.2.2): Extracting archive
  - Installing sebastian/version (3.0.2): Extracting archive
  - Installing sebastian/type (2.3.1): Extracting archive
  - Installing sebastian/resource-operations (3.0.3): Extracting archive
  - Installing sebastian/recursion-context (4.0.4): Extracting archive
  - Installing sebastian/object-reflector (2.0.4): Extracting archive
  - Installing sebastian/object-enumerator (4.0.4): Extracting archive
  - Installing sebastian/global-state (5.0.2): Extracting archive
  - Installing sebastian/exporter (4.0.3): Extracting archive
  - Installing sebastian/environment (5.1.3): Extracting archive
  - Installing sebastian/diff (4.0.4): Extracting archive
  - Installing sebastian/comparator (4.0.6): Extracting archive
  - Installing sebastian/code-unit (1.0.8): Extracting archive
  - Installing sebastian/cli-parser (1.0.1): Extracting archive
  - Installing phpunit/php-timer (5.0.3): Extracting archive
  - Installing phpunit/php-text-template (2.0.4): Extracting archive
  - Installing phpunit/php-invoker (3.1.1): Extracting archive
  - Installing phpunit/php-file-iterator (3.0.5): Extracting archive
  - Installing theseer/tokenizer (1.2.0): Extracting archive
  - Installing nikic/php-parser (v4.10.5): Extracting archive
  - Installing sebastian/lines-of-code (1.0.3): Extracting archive
  - Installing sebastian/complexity (2.0.2): Extracting archive
  - Installing sebastian/code-unit-reverse-lookup (2.0.3): Extracting archive
  - Installing phpunit/php-code-coverage (9.2.6): Extracting archive
  - Installing doctrine/instantiator (1.4.0): Extracting archive
  - Installing phpspec/prophecy (1.13.0): Extracting archive
  - Installing phar-io/version (3.1.0): Extracting archive
  - Installing phar-io/manifest (2.0.1): Extracting archive
  - Installing myclabs/deep-copy (1.10.2): Extracting archive
  - Installing phpunit/phpunit (9.5.4): Extracting archive
8 package suggestions were added by new dependencies, use `composer suggest` to see details.
Generating autoload files
29 packages you are using are looking for funding.
Use the `composer fund` command to find out more!

deicool · May 4, 2021

Ok. I reinstalled. And now the port 80 works. Thank You.

Just wondering, I don't need Wordpress. I just need CodeIgniter. So can I just install OpenLiteSpeed/CodeIgnitier/PHP/MySQL?

Cold-Egg · May 5, 2021

The current script is for WordPress only. Since it will install OLS, PHP, and DB for you, it should be easy to install CodeIgniter manually based on it.

deicool · May 5, 2021

Need script/help to get CodeIgniter working with OpenLiteSpeed. Thanks

Cold-Egg · May 5, 2021

It's an open-source project, feel free to fork it and modify it to your need.

CodeIgniter

deicool

New Member

Cold-Egg

Administrator

deicool

New Member

Cold-Egg

Administrator

deicool

New Member

deicool

New Member

Cold-Egg

Administrator

deicool

New Member

Cold-Egg

Administrator