I have tested 1.4.3 , but not works, why?

oyang

New Member
#1
I just install the Openlitespeed 1.4.3 , Only the index .php works .
In Xvmlabs,com 512M VPS debian X86-minimal with this code
Code:
apt-get update
apt-get install -y build-essential libncurses5 libncurses5-dev libc6 libc6-dev wget flex re2c unzip bison gcc g++ autoconf patch make automake cmake expect ruby file bzip2 libmhash-dev libtool libjpeg8 libjpeg8-dev libpng12-0 libpng12-dev libxml2 libxml2-dev libmcrypt-dev curl libcurl3 libcurl4-openssl-dev libfreetype6 libfreetype6-dev libpcre3 libpcre3-dev libexpat1-dev libssl-dev libgeoip-dev zlib1g-dev libpng-dev openssl e2fsprogs libsasl2-dev libidn11 libidn11-dev libevent-dev ntpdate

wget http://open.litespeedtech.com/packages/openlitespeed-1.4.3.tgz
tar zxf openlitespeed-1.4.3.tgz
cd openlitespeed-1.4.3
./configure
make && make install
Error log
Code:
2014-12-08 02:05:34.748 [INFO] [PlainConf] [httpServerConfig:] start parsing file /usr/local/lsws/conf/httpd_config.conf
2014-12-08 02:05:34.748 [INFO] [PlainConf] [httpServerConfig:] Failed to RCS checkin conf file /usr/local/lsws/conf/httpd_config.conf0, ret 32512, error(Invalid argument). Org command is ci -l -q -t-"/usr/local/lsws/conf/httpd_config.conf0" -mUpdate "/usr/local/lsws/conf/httpd_config.conf0" >/dev/null 2>&1.
2014-12-08 02:05:34.748 [NOTICE] Loading LiteSpeed/1.4.3 Open ...
2014-12-08 02:05:34.748 [NOTICE] Using [OpenSSL 0.9.8o 01 Jun 2010]
2014-12-08 02:05:34.757 [NOTICE] [ADMIN] server socket: uds://usr/local/lsws/admin/tmp/admin.sock.7863
2014-12-08 02:05:34.757 [NOTICE] [config] chroot is disabled.
2014-12-08 02:05:34.757 [INFO] [config] old priority: 0, new priority: 0
2014-12-08 02:05:34.757 [INFO] [Module: modcompress 1.1] has been initialized successfully
2014-12-08 02:05:34.757 [INFO] [Module: moddecompress 1.1] has been initialized successfully
2014-12-08 02:05:34.757 [INFO] [config:server:basics2] For better obscurity, server version number is hidden in the response header.
2014-12-08 02:05:34.797 [INFO] [PlainConf] Failed to RCS checkin conf file /usr/local/lsws/conf/mime.properties0, ret 32512, error(No such file or directory). Org command is ci -l -q -t-"/usr/local/lsws/conf/mime.properties0" -mUpdate "/usr/local/lsws/conf/mime.properties0" >/dev/null 2>&1.
2014-12-08 02:05:34.797 [NOTICE] [PID: 427]: forked cgid: 436
2014-12-08 02:05:34.797 [INFO] [PlainConf] [adminConfig:] start parsing file /usr/local/lsws/admin/conf/admin_config.conf
2014-12-08 02:05:34.827 [INFO] [PlainConf] [adminConfig:] Failed to RCS checkin conf file /usr/local/lsws/admin/conf/admin_config.conf0, ret 32512, error(No such file or directory). Org command is ci -l -q -t-"/usr/local/lsws/admin/conf/admin_config.conf0" -mUpdate "/usr/local/lsws/admin/conf/admin_config.conf0" >/dev/null 2>&1.
2014-12-08 02:05:34.827 [DEBUG] [config:admin:listener:adminListener:ssl] Create SSL context with Certificate file: /usr/local/lsws/admin/conf/webadmin.crt and Key File: /usr/local/lsws/admin/conf/webadmin.key.
2014-12-08 02:05:34.828 [NOTICE] [config:admin:listener:adminListener:ssl] SET OPENSSL CTX TIMEOUT FROM 300 TO 300
2014-12-08 02:05:34.828 [NOTICE] [config:admin:listener:adminListener:ssl] SET OPENSSL CTX 0x97235d8 <0x972d320> MAP SSL CACHE 1024 [40960] TIMEOUT 300 [300] Options 1514FFF [1514FFF] Mode 302 [2]
2014-12-08 02:05:34.828 [NOTICE] [config:admin:listener:adminListener:ssl] EXTERNAL SHM SSL CACHE ENABLED
2014-12-08 02:05:34.828 [DEBUG] [config:admin:listener:adminListener:ssl] set ciphers to:SSLv3:TLSv1:HIGH:MEDIUM:!aNULL:!MD5:!SSLv2:!eNULL:!EDH
2014-12-08 02:05:34.828 [NOTICE] [config] The maximum number of file descriptor limit is set to 4096.
2014-12-08 02:05:34.829 [INFO] [PlainConf] [virtualHostConfig:] start parsing file /usr/local/lsws/conf/vhosts/Example/vhconf.conf
2014-12-08 02:05:34.842 [INFO] [PlainConf] [virtualHostConfig:] Failed to RCS checkin conf file /usr/local/lsws/conf/vhosts/Example/vhconf.conf0, ret 32512, error(Bad file descriptor). Org command is ci -l -q -t-"/usr/local/lsws/conf/vhosts/Example/vhconf.conf0" -mUpdate "/usr/local/lsws/conf/vhosts/Example/vhconf.conf0" >/dev/null 2>&1.
2014-12-08 02:05:34.844 [INFO] [PlainConf] [virtualHostTemplate:] start parsing file /usr/local/lsws/conf/templates/ccl.conf
2014-12-08 02:05:34.850 [INFO] [PlainConf] [virtualHostTemplate:] Failed to RCS checkin conf file /usr/local/lsws/conf/templates/ccl.conf0, ret 32512, error(Invalid argument). Org command is ci -l -q -t-"/usr/local/lsws/conf/templates/ccl.conf0" -mUpdate "/usr/local/lsws/conf/templates/ccl.conf0" >/dev/null 2>&1.
2014-12-08 02:05:34.850 [INFO] [PlainConf] [virtualHostTemplate:] start parsing file /usr/local/lsws/conf/templates/phpsuexec.conf
2014-12-08 02:05:34.856 [INFO] [PlainConf] [virtualHostTemplate:] Failed to RCS checkin conf file /usr/local/lsws/conf/templates/phpsuexec.conf0, ret 32512, error(Invalid argument). Org command is ci -l -q -t-"/usr/local/lsws/conf/templates/phpsuexec.conf0" -mUpdate "/usr/local/lsws/conf/templates/phpsuexec.conf0" >/dev/null 2>&1.
2014-12-08 02:05:34.856 [INFO] [PlainConf] [virtualHostTemplate:] start parsing file /usr/local/lsws/conf/templates/rails.conf
2014-12-08 02:05:34.860 [INFO] [PlainConf] [virtualHostTemplate:] Failed to RCS checkin conf file /usr/local/lsws/conf/templates/rails.conf0, ret 32512, error(Invalid argument). Org command is ci -l -q -t-"/usr/local/lsws/conf/templates/rails.conf0" -mUpdate "/usr/local/lsws/conf/templates/rails.conf0" >/dev/null 2>&1.
2014-12-08 02:05:34.861 [NOTICE] [AutoRestarter] new child process with pid=455 is forked!
2014-12-08 02:05:34.861 [DEBUG] [config] try to give up super user privilege!
2014-12-08 02:05:34.861 [NOTICE] [config] [child: 455] Successfully change current user to nobody
2014-12-08 02:05:34.861 [NOTICE] [config] Child: 455] Core dump is enabled.
2014-12-08 02:05:34.861 [NOTICE] [Child: 455] Setup swapping space...
2014-12-08 02:05:34.861 [NOTICE] [Child: 455] LiteSpeed/1.4.3 Open starts successfully!
With the ssl it very slow .
index.jpg configuration.jpg
Who can tell me whis wrong with this?

Thanks, good luck!
 

lsmichael

Active Member
#2
Hi Oyang,

Thanks for trying out OpenLiteSpeed.

We're not exactly sure why you're getting this issue right now. Our developers are testing it out to see if they can replicate it. I'll notify you as soon as we know more.

Cheers,

Michael
 

oyang

New Member
#4
Sorry for that I forget the google service is all blocked by chinese firewall.
I check the index.php , found many google things , I hope you save them in local server.
With ssl , after I use proxy ,it is too slow to access it , even cannot access it.
This is my CP url : https://104.128.86.182:7080
Username and password is default , please check if it works well, thanks.

By the way do you have any plan for ARM webserver?
I just tried the online.net ARM cloud server, can works , but little software.
Tough the apache and nginx can works , but without optimization the arm webserver will not works well.

Here is the result
Webserver info :http://212.47.232.8/p.php
PHPinfo : http://212.47.232.8/info.php
I installed wordpress ,works well .
I think the arm webserver will bigger and bigger ,

Thanks for your reply , good luck!
 

oyang

New Member
#6
Thanks , it google"s problem , but I think our firewall will block google for a long time maybe many years.
So I hope you can save the google sans and google ui in the vps or server .
 
L

Lauren_LST

Guest
#10
We'll put the changes in next build, meanwhile you can modify the file under view/inc/header.php, uncomment the 2 <script> tags:
Code:
        <!-- Link to Google CDN's jQuery + jQueryUI; fall back to local -->
        <script src="//ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
        <script>
            if (!window.jQuery) {
                document.write('<script src="/res/js/libs/jquery-2.1.1.min.js"><\/script>');
            }
        </script>
        <script src="//ajax.googleapis.com/ajax/libs/jqueryui/1.11.1/jquery-ui.min.js"></script>
        <script>
            if (!window.jQuery.ui) {
                document.write('<script src="/res/js/libs/jquery-ui-1.11.1.min.js"><\/script>');
            }
        </script>
however, it will be faster for you just replace the above section with local files directly, like this:
Code:
<script src="/res/js/libs/jquery-2.1.1.min.js"></script>
<script src="/res/js/libs/jquery-ui-1.11.1.min.js"></script>
For the fonts one, you can ignore that line, it will use your default.
Can you access this url?
http://fonts.gstatic.com/s/opensans/v10/PRmiXeptR36kaC0GEAetxuGaZ6kaGPxTsxBG85inVYY.woff2
If yes, we can add a local scripts for google fonts, I don't want to include whole fonts library in the package.


Lauren
 

lsmichael

Active Member
#12
And, as for ARM servers, we currently have no plans for this. Thanks for the suggestion, though. Maybe if we start hearing about ARM servers taking more of the market we'll think about it, but at the moment, it's kind of too small of a blip to be on our radar.

Cheers,

Michael
 
#13
And, as for ARM servers, we currently have no plans for this. Thanks for the suggestion, though. Maybe if we start hearing about ARM servers taking more of the market we'll think about it, but at the moment, it's kind of too small of a blip to be on our radar.

Cheers,

Michael
Thanks , infact I am using openlitespeed and litespeed for my blog. They both work well.
 
#15
Is it possible to have all references to externally hosted files be removed/changed to local files? I really don't like to give external companies insight in where my servers are located, and if something is changed in the future on an external server it might break the web interface.
 

lsmichael

Active Member
#16
Hey Raldnor,

Doing some cleanup (and trying to improve our bug tracking/feature requests). Sorry I didn't answer this before. I believe only the fonts are externally hosted, and that's because they're kind of a huge file.

m
 
Top